Inhouse product
C200 wireless composite smoke detector and carbon monoxide alarm (composite 433)
Product Profile
The photoelectric composite detector is used for the detection of CO gas or smoke. In order to ensure the safety of home life, it is recommended to install composite alarm detectors in bedrooms,corridors, lofts, basements and other places. The product is powered by a DC 9V battery. When the detector gives an alarm, it will emit an alarm sound of >85dB, and the alarm light will flash at the same time. The detector has a low-voltage alarm function and a button alarm mute or test function. The detector uses low-power technology, and the theoretical battery is replaced once a year.
Product characteristics
?Support three major alarms: smoke + Co +wireless transmission network alarm;
?Fully snap-in patented structure, simple installation, no need for debugging and wiring;
?360 all-round detection of smoke alarm, no dead ends, reliable;
?Built-in high-sensitivity induction technology,reliable, safe;
?Built-in 85dB sound and light alarm, effective reminder evacuation site;
?Adopt ultra-low-power microprocessor +photoelectric principle technology, ultra-long standby life battery use for 3 years;
?Low battery alarm function, when the battery voltage lower than 6.8V, It will make warning tone out;
?The housing is designed to full rotary detachable buckle of easy maintenance
C200 and receiving alarm host pairing method
?Set the host in the“Align”mode;Press the C200 (TEST) key, the device beeps while transmitting wireless signals
[TEST] key two functions
?In the alarm state, press the [TEST] key, the product stops alarming
?In the non-alarm state, press the [TEST] key,the device alarm light blinks and sounds, and wireless signals are transmitted
Considerations for installation
> Do not install near doorways, windows, fans,etc., because this place generally has fast air circulation, which will affect the sensitivity of the alarm.
?Do not install in locations with high tide temperatures, such as bathrooms, top floors, or temperatures above 50? or down to minus 10?.
?Do not install in places with high temperature and high wind speed, otherwise it will affect the sensitivity.
?In order to keep the sensor working efcienly,the sensor needs to be cleaned every 6 months.Remove the battery first, then swipe the dust
witha soft brush, and then put the battery back into the battery box.
?Abnormal temperature can also cause false alarms. Just let the air in the space circulate and the alarm sounds stopped. Dust will also reduce the sensitivity of the alarm. Please improve according to the cleaning method above.
Applicable Scenarios
Easy installation
What is Included
Login Or Registerto submit your questions to seller
No none asked to seller yet