For Lowrance & Simrad 000-0120-37 Yamaha Engine Interface Cable NMEA 2000 (7M) w/"T"

For Lowrance, Simrad, Garmin and All NMEA Compliant Units 20-0120-37 Yamaha Engine Interface Cable 4-Pin Connector For NMEA 2000 7 Meter Length.
4-pin data connector. For use with a NMEA 2000 network. Works with NMEA 2000-compliant GPS/Chart-Plotting units. Connects directly to the NMEA 2000 connector under the engine's cowling.
The boat must have at least a basic NMEA backbone (Starter Kit) installed for the cable to interface with the GPS unit.
Connects to Yamaha engines without Yamaha CommandLink Plus system.
•
-2006 & newer: F50, T50, F60, T60, F75, F90, F115, LF115, F150, LF150, F200, LF200, F225, F225, F250, LF250.
•
-2006 & newer: Z150, LZ150, VZ150, Z175, Z200, LZ200, VZ225, Z250, LZ250, VZ250, Z300, LZ300, VZ300.
•
Including SHO models as well
Outputs:
•
For Yamaha| 4-stroke 50-250| 2-stroke HDPI 150-350
•
RPM Yes
•
Alternator Voltage| Yes
•
Engine Hours| Yes
•
Engine Temperature| Yes
•
Fuel Pressure| Yes
•
Fuel Rate| Yes
•
Oil Pressure| Yes
•
Trim *| Yes
•
Water Pressure**| Yes
*Digital trim must be connected by you or a Yamaha dealer.
**May require addition of pressure sensor depending on engine model