GT06 GT02N DYEGOO Guaranteed 100% Vehicle Car Motorcycle GPS Tracker ACC Alarm SOS Alarm Sound monitor Android IOS APP

 color : gt02n,gt06

 Desciption : 
GT06 GT02N is a Mini intelligent GPS Vehicle positioning terminal. It combines the GSM wireless communication technology and GPS positioning system technology,terminals using industrial-grade highly integrated design,intelligent power-saving and passive drift suppression,installation is simple,connect the power supply to start work immediately,wide inpute voltage range,wide applicable to all types of cars,motor cycles,electric cars,ships,etc., can provide all-weather,real-time vehicle positioning function,with global positioning service platform,you can achieve remte vehicle management.
Device feature
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet.
Overview of the characteristics:
1.GPS position.
2.GSM 850/900/1800/1900MHZ.
3.With Vibration Sensor.
4.180Mah Battery inside, Power-Cut alarm.
5.Electric Fence.
6.Voltage 10-40V.
7.SOS alarm.
8.Voice Monitor.
9.ACC Alarm.
1. Specification
1).GSM:850/900/1800/1900MHZ
2).GPRS: Class12, TCP/IP
3).Working Voltage:10-40V DC
4).Working current:22mA (12VDC)
5).Working current:12mA (24VDC)
6).GPS locating time:
Cold start:38s(Open sky)
Warm start:32s
Hot start:2s(Open sky)
7).GPS Precision:10m(2D RM)
8).Working temperature:-20Celsius~+70Celsius
9).Working humidity:20%~80%RH
10).Measurement:98(L)×52(W)×16.5(H)mm
2.Accessories
Power wire,SOS wire,Microphone,Relay
Manual Download By QR Code:
3.Platform:
www.dyegoo.net
4.Wire defined
5.Device wiring
6. SMS Commands instruction
1)Administrator Number
Text command
Parameter
Sample
CENTER Add
710#number#
711#number#
710#13500135000#
711#13800138000#
CENTER Del
D01#
D02#
D01#
D02#
Command Description
1)Center number can control the oil and power and resume factory settings
2) Center number can receive the call and text of vibration alarm and over speeding alarm.
3) SIM must display the income call number to control oil and power.
4) Only one number can be center number.
5) Change center number must resend the command.
6)Add new center number by CETNER,A, and delete by CENTER,D
Command Feedback
Successful Setting:Add admin account 1 OK!
2)View Administrator Number
Text command
Parameter
Sample
View
901#
901#
Command Description
This directive is used to view Device Manager number.
Command Feedback
Successful Setting:Admin1:
Admin2:
3)Authorized Number Set
Text command
Parameter
Sample
Authorized Add
101# number #
102# number #
103# number #
1:101#13800138000#
2:102#12345678912#
3:103#12345678912#
Authorized Del
D11#
D12#
D13#
D11#
D12#
D13#
Command Description
1) Authorization number for SMS control oil.
2) only three numbers to set the authorization number
3) change the authorization number needs to delete the previous number
Command Feedback
Successful Setting:Add Authorization account 1 OK!
4)View Authorized Number
Text command
Parameter
Sample
View authorized
C10#
C10#
Command Description
This directive is used to view the equipment authorization number
Command Feedback
Successful Setting:
Authorization 1:
Authorization 2:
Authorization 3:
5)APN Setting
Text command
Parameter
Sample
APN Setting
802#username#password#
1:802#java.claro.com.br#claro#claro#
2: 802#internet#
Command Description
APN differs according to the local telecom operators.
For example:APN request password,please refer to Sample 1,and Sample 2 for no password.
Command Feedback
Successful Setting:SET APN OK!
6)Set / View Server
Text command
Parameter
Sample
SERVER Parameter
803#SERVER # port#
803#47.90.39.27#6100#
View SERVER
CIP#
1)CIP#
Command Description
Change the IP and port when move to a new server
port:10~65535
1 is domain and 0 is IP;
Command Feedback
Successful Setting:set IP OK!
7)Moving Time Interval
Text command
Parameter
Sample
TIMEER Parameter setting
730#uploading interval#
730#20#
Command Description
Time scope:0,10~60 seconds; 0,no data uploading;
10~60,means time interval;the default value is 15 seconds!
Command Feedback
Successful Setting:SET TIMER OK!
8)Static Time Interval
Text command
Parameter
Sample
STATIC
SUP# time interval#
SUP#5#
Command Description
Timescope:1~60 seconds;The device has
3D transmission and the default time interval are 5 minutes.
Command Feedback
Successful Setting:SET STATIC TIME OK!
9)Cancel the continuous upload
Text command
Parameter
Sample
NUP
NUP#
NUP#
Command
Description
This command is used to cancel sending data to the platform
If need again to restore the upload , you need to send TIMEER Parameter setting.
Command Feedback
SET OK!
10)Power-Cut
Text command
Parameter
Sample
RELAYParameter1
222#
222#   cut off oil and power
RELAYParameter2
333#
333#  recover oil and power
Command Description
1)RELAY control the start and closeness of the relay
2) Only the center number can operate.
3)the device only cut off the oil circuit on the condition of the driving speed below 20KM/H or in static state.
4)When send the command, the device will reply “please waiting “When the vehicle speed is over 20KM/H, the device will cut off the oil or the power when the speed below 20KM/H.
Command Feedback
Successful Setting:Fuel cut has already been completed OK!
11)GMT
Text command
Parameter
Sample
GMT
801#location, time#
801#E8#
Command Description
The default time zone is Beijing time. If time zone need revised, please operate according to the above command.
Command Feedback
Successful Setting:Set time zone ok!
12)Vibration Sensitivity
Text command
Parameter
Sample
VIBRATION Parameter
123#2#,alarming way#
1) 123#2#3#
Set into vibration alarm time
V123#2#
1) V123#2#
2) V123#1#
Cancel vibration alarm
456#
456#
Command Description
the sensitivity  value of the vibration is from 1 to 5,1is the most sensitive and o is close. Alarming ways: 1, calling 2, texting, 3 calling and texting.
Must set the center number and receiving number.
Command Feedback
set vibration alarm level,OK!
13)Speeding
Text command
Parameter
Sample
SPEEDING Parameter
SSA#120# alarming way#
1)SSA#120#3#
2)SSA#120#
Command Description
The speed scope is form 60-220, if the speed is no this cope, the alarm is off.
Alarming :1, calling 2, texting, 3 calling and texting.
Must set the center number and receiving number.
Command Feedback
Successful Setting:set speeding alarm,OK!
14)Reset
Text command
Parameter
Sample
RESET
930#
930#
Command Description
Reset the device
Command Feedback
Successful Setting:Reset system, ok!
15)Factory
Text command
Parameter
Sample
Parameter
940#
940#
Command Description
Restore the factory setting
Only center number can initial this function
Factory setting will recover to the original setting
Command Feedback
Successful Setting:FACTORY OK!
16)Language Setting
Text command
Parameter
Sample
LANG Parameter
LANG1#
LANG0#
LANG1#  1:CHINESE,
LANG0#:ENGLISH
Command Description
;When check the location, it will reply the Chinese location in Chinese language setting; while reply the URL link when in English language setting.
Command Feedback
Successful Setting:SET LANG OK!
17)Position
Text command
Parameter
Sample
WHERE
988#
988#
Command Description
Check the longitude and altitude  and other information of the device
Command Feedback
Reply with longitude and altitude, speed and IMEL.
18)Google Link
Text command
Parameter
Sample
WHERE
666#
666#
Command Description
Check the location link of Google map
Command Feedback
maps.google.com/maps?q=N22.540885,E113.95265
19)Version
Text command
Parameter
Sample
VERSION
V00#
V00#
Command Description
The command is to check the software version
Command Feedback
VERSION:Xxxx
BUILD:2012-07-05 10:12
20)Param Check
Text command
Parameter
Sample
PARAM
886#
886#
Command Description
The command is to check the settings and the default parameter.
Command Feedback
IMEI:351190012535936
APN : cmnet
IP:IP and port
TIMER: moving uploading interval
STATIC: static uploading interval
CENTER: center number
LANG: language(CN/EN)
GMT: time zone (E/W8)
21)Status Check
Text command
Parameter
Sample
STATUS
902#
902#
Command Description
The command is designed for checking the device’s working status.
Command Feedback
External power:ON/OFF
GSM Signal:HIGH/MIDDLE/LOW
GPS:FIXED/UNFIXED
RELAYER:DISABLE/ENABLE
Vibrate Warning:ON/OFF
Pause:ON/OFF
22)Monitor (Voice Surveillance)
Text command
Parameter
Sample
SSS#
SSS#
SSS#
Command Description
Using Command Send this command to the tracker’s number, the tracker will call back to admin number.
Command Feedback