LWZH Black Sliding Interior Barn Door Hardware Sets Closet Wood Door Kits Y-Shaped Track Rollers for Double Door 14FT/15FT

 color : 13.6ft 4145mm,13ft 3962mm,14.5ft 4420mm,14ft 4267mm,15.5ft 4724mm,15ft 4572mm

LWZH Country/ European/American Style Wood Sliding Barn Door Hardware Kits Black Steel Rail Track Sets Closet Door Roller for Double Door

PLS NOTE:  ONLY the hardware kit is for sale, door panel is not included. This hardware kit is for Double door.

Please make sure your wall is strong enough to hang heave door panel before buying.

Easy to Install:All accessories and step-by-step instructions with pictures included.

Long Sliding Rail: High quality steel for high weight capacity.

Sliding Rollers:Quality bearing steel keep the wheels run smoothly in track.

Sliding barn door hardwareis popular to be installed inbedroom, study room, living room, kitchen, bathroom, closet etc.which can match with different styles and different colors of doors for the simple and artistic style.

Push-pull opening and closing way saves lots of space which is quite suitable for modern decoration style.

Rollers Pictures

Due to the simple design of the slide, no installation experience is needed, just follow the simple installation instructions.

Choose Door Width and Sliding Roller

1) Confirm Door Width

Single Door: Door Width=Door Opening Width+100mm

Double Door: Door Width=(Door Opening Width+100mm)/2

Example:

Single door opening width 800mm, door width at least needs to be 900mm

Double door opening width 1500mm, door width at least needs to be 800mm

Notice: Please note 100mm is the least to add.

2) Confirm Length of Sliding Rail

Single Door:Sliding Rail Length > Door Width*2

Double Door:Sliding Rail Length > Door Width*4

The clearance from the top of the door to the ceiling is about 6';

The clearance between door panel and wall is about 5/8' if take 1 3/5' thick door for example;

Track Accessories

Installation Instructions:

1. Measure the Wall and Drill Holes

Different sliding rail sizes require different measurements and hole quantites, please measure first and use a pencil mark on the wall.

Then you can drill holes as suggested. Please note percussion bit size for wooden door is F5mm and concrete wall is F10mm.

2. Install Anchoring Screws (Concrete Wall)

NOTE!Wooden Wall: Use the hammer to punch the screw in, then use the wrench to twist the screw until it is fixed.

3. Install Sliding Rail

4. Install the Sliding Roller

Find the sliding roller you have first, measure size and draw lines as below pictures.

Mark the place where you need to drill the holes.

Then drill holes accordingly and fix the screws to finish the installation of sliding roller.

5. Install Anti-Jump Disk

(1) Put the anti-jump disk to the edge of the door and fix it first

(2) Then spin it to the center of the door and screw the disk

6. Install Floor Guide and Adjust Door Stops

Position: 25mm from the wall to the center line of the floor guide holes. Distance between the wall and inside holes is 24mm.

Measurements: Two holes, distance 24mm, use a F6mm bit, hole depth 30mm.

7. Tools Needed

Please contact us at any moment if you have any questions about the products, we will get back to you in a timely manner.

About taxes or duties:

All of our price doesn't include the Taxes or duties or VAT, pls kindly note, thanks.

Most Packages to USA won't course taxes.

To Canada may course CAD 15-30 for reference.

To European country may course EUR 35-50 for reference.

For detailed cost, pls kindly ask your local custom.

About Feedback:

Your satisfaction and positive feedback is very important to us. If you are  satisfied with our items and service,Pls kindly give us 5 Stars.

If you have any problems with our items or services, please feel free to contact us firstBEFOREyou leave neutral or negative feedback. Then we will try our best to solve any problem and provide you with the best customer services.

We maintain high standards of excellence and strive for 100% customer satisfaction!