Sewing Machine Cheap Best,portable Sewing Machine Set - Mini Manual With Stretch Stitch For Home & Travel

color : blue,gold,orange,red,silver,white

Desciption : 

Portable Manual Sewing Machine Set Home Mini Sewing Machine Wholesale Factory Price Cross-border Hot Sale

Product attributes

Product Category Home Sewing Machines

Whether to importNo

Type Portable Pocket

Item No. Sewing Set

Origin Yiwu

Box quantity 112 sets

Whether the patent source No

Gross weight 160g

Color mixing (112 sets/box), blue suit, gray and white suit, purple suit, blue sewing machine, gray and white sewing machine, purple sewing machine

The main downstream platform ebay

Main sales area Southeast Asia

Is there a licensed private label?

Whether the cross-border export special source is

Simple style

Custom processing: Yes

Correct usage of micro sewing machines

1. Holding the machine: Hold the machine base with four fingers of your right hand, place your thumb naturally on the top of the upper cover of the machine body, and hold the machine smoothly.

2. Threading: Gently pull out the thread on the spool. Pass through the lead diagram A and then introduce the wire clamping adjustment tab

B. Then pass through the lead coil. C. Temporarily place the threaded thread next to the machine needle, and pass the threading device through the machine needle hole from the front of the machine needle (towards the junction of the machine body). Then, introduce the thread into the small hole of the threading device, exit the threading device, and pull out the threaded thread by about 2-3 centimeters. Press the thread pressing plate to be ready for use

3. Cloth placement: Lift the pressing plate with your right index finger, place the fabric (thickness not exceeding 0.8mm) ready for sewing under the pressing plate smoothly, and gently place it back on the pressing plate to press the fabric;

4. Sewing operation: Hold the fabric with your left hand, gently and quickly press down the top of the upper cover with your right thumb to the bottom, and then press down with your thumb again. Repeat this process, and the fabric feeding mechanism will automatically send the sewn fabric to the left. Gradually move the right hand of the machine to the right, and gently move the quilt to the left with the left hand holding the cloth in accordance with the sewing rhythm until the sewing is completed;

5. End: After sewing, use scissors to cut the thread ends, and gently pull up the pressing plate to take out the fabric. From the reverse side of the fabric to be sewn, pull out the thread end, thread it into the next section of the coil, tighten it, and tie a knot to secure the stitch. When sewing is completed, do not use hard pulling on the fabric to break the thread end, to avoid damaging the needle and stitch;

6. This machine automatically feeds and adjusts the tightness between the pins, but it is necessary to note the following points:

A. The pin is too tight, adjust the pressure nut slightly counterclockwise;

B. If the pin is too loose, adjust the pressure nut slightly clockwise;

As shown in, fasten the correct pins loosely. For larger stitches, pull the cloth slightly faster on the left hand. If you need to stitch more tightly, pull the cloth with your left hand slightly slower;

7. Wire changing group; If replacing a large coil, connect the spare extension rod to the spool shaft and insert the large coil. Place the spare plastic cap at the end of the rod to fix the large ball of thread, then thread it again, adjust the tightness of the thread, and then sew it; The effect of using 50 # - 90 # cotton thread or synthetic thread is very good;

8. Needle replacement: Loosen the fixing screw and take out the broken needle. Install the new needle as shown in. Be careful to align the flat surface of the needle with the fixing screw and not install it upside down. Needle type DHK-14.