Smart Switches Tiny RF Momentary Switches DC5V6V9V12V14V18V24V28 Wireless Switch Safety Protection Alarm Remote Switch PCB Board

color : dark khaki,light green,light grey,light yellow

Desciption : 

Working Voltage: DC5V-30V 

(DC 5V 6V 7.4V 9V 12V 14V 16V 18V 24V 26V 28V) All is ok

Quiescent /Standby Current: 3.6-10ma

Working Current: 70-130ma ( if your power supply is mini battery , you must care how long can it work for you)

Relay Standard :  10A

Max Load:10A Relay, Resistive load=8A,Inductive load=3A

Board Size : 31.3*34.8*17mm  Case Size: 40*37*25mm

Working Frequency: 433.92MHZ

Learning Code: Learning Button to add Transmitter

Working Mode: Momentary Toggle Latched adjusted by Learning Button

Momentary----- Press and Hold---ON, Release----OFF

Toggle-------Press one time ----ON. Press it again ----OFF

Latched--------Press A ----ON, Press B-----OFF   (Latched Mode will ship with 2 Button Transmitter)

Momentary 5s Time Delay OFF----- Press and Hold---ON, Release----5s laterOFF

Momentary 10s Time Delay OFF----- Press and Hold---ON, Release----10s laterOFF

Momentary 15s Time Delay OFF----- Press and Hold---ON, Release----15s laterOFF

Momentary 20s Time Delay OFF----- Press and Hold---ON, Release----20s laterOFF

Power ON Receiver ON -----Input power -----ON, Press Remote -----OFF

V-     -------------------Input GND –

V+   -------------------Input VCC +

NC---------------------Normally Close

COM------------------Common

NO---------------------Normally Open

Momentary Toggle Latched adjusted by learning Button 

Clearing Code

Press the Receiver learning button for 9 times, LED indicator off and flash 5 times , it means the code have been cleared

(with the same remote ,if you need change working mode, you must clear the code first ,then relearn it again)

Learning Code

Momentary------Press the learning button for 1 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Toggle------Press the learning button for 2 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Latched-------Press the learning button for 3 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Momentary 5s time delay off-----Press the learning button for 4 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Momentary 10s time delay off-----Press the learning button for 5 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Momentary 15s time delay off-----Press the learning button for 6 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Momentary 20s time delay off-----Press the learning button for 7 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Power ON Receiver ON-------Press the learning button for 8 time , LED indicator flash 1 time and on, press remote button ,LED indicator flash 3 times

Transmitter

It is a RF Transmitter Board without case and the Button, Just Input DC3V-DC12V Power for it, It will transmitting Signal, It is a  Micro Transmitter Module for  Learning Code Receiver. The Transmitter Module can be controlled by Smoke Detector or others Sensor or Microcontroller.

Working Voltage: DC3.7V-DC12V

(The Best Voltage is DC4V-DC12V, DC3.7V Distance will be Shorter)

Mini Battery DC3.7V-12V  Big Battery / DC Stable Adapter DC3V-9V

Input DC3.7V-DC12V for the Receiver, It Transmitting Signal

Modulation Mode: ASK

Quiescent Current: 0uA

Working Current: 7-20 ma

Transmitting Power: 35-50mW

Encoding Type: Learning Code (Ev1527)

Transmitting Distance: 10-100m

Receiving Sensitivity: 108dBm

Size: 30*19*12mm