433mhz Universal Wireless Remote Control Switch Ac 85v ~ 250v 110v 220v 1ch Relay Receiver Module And Rf 433 Mhz Remote Controls - Remote Control

Desciption : 

2pcs 433Mhz Universal Wireless Remote Control Switches AC 85V ~ 250V 110V 220V 1CH Relay Receiver Module With RF Remote Controls

Technical Data:

Input Power:AC85V-250V

Standby Current:97dbm

Transmitting distance:20-50m ( open space)

Decoding mode:software decoding

Remote storage:25pcs

Support remote type: Learning code 1527code, Fixed code(Rolling code can be design)

Working mode:Momentary, Toggle, Latching

Wiring type:fixed terminal

Output Terminal :NO , NC , COM

Dimension of PCB:53.8*31.2mm.

Wiring diagram 1:

NO: Output , normal open;

COM:Output , common ;

NC: Output , normal close.

Package Included:

Receiver module (KR2201-4 ) * 2pcs ( include Shell );

?Remote Control (KT05-4)

* 2pcs (include Battery);

(Two characters of the button Random delivery)!!!

Free Gift:Cross screwdriver* 1pcs.

Attention Please:

Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order,

If you need more cross screwdriver or the flat head screw driver, please order the following links:

https://www.aliexpress.com/store/product/2pcs-set-433-mhz-Hot-Fashion-Repair-Kit-Cross-Flat-Head-Screw-Driver-For-433Mhz-RF/2921105_32798261466.html

About Working mode:

Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.

Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .

Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.

Clearing the code :

Push the learning button on the receivers for 8 times , the codes will be cleaned .

After clearning the code, all the remote control cannot work any more.

Learning the code :(momentary)

Push the learning key on the receiver once time, it comes into momentary setting mode .

Wait for a moment , the LED will be off , it comes into learning state .

Push the remote button , LED indicator on the receiver board will flash then come off .

After 3 seconds, the LED indicator will be on again , learning successfully .

Learning the code : ( Toggle )

Push the learning key on the receiver twice time , it comes into toggle setting mode

Wait for a moment , the LED will be off , it comes into learning state .

Push the remote button,LED indicator on the receiver board will flash then come off.

After 3 seconds , the LED indicator will be on again , learning successfully .

Learning the code :( Latching )

Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.

For example : button A = ON , button B = OFF

Push the learning key on the receiver triple time ,the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times . Push the remote button B, Led flash for 3 times . After 3 seconds , the LED indicator will be off , Learning to succeed.

A = ON , B = OFF .

NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .

?

Two characters of the button Random delivery!!!