Hot Ac 85v 110v 220v 250v 1ch Rf Wireless Remote Control Switch Module Receiver + 3x 3ch 433mhz 86 Wall Panel Remote Transmitter - Remote Control

Hot AC 85V 110V 220V 250V 1CH RF Wireless Remote Control Switch Module Receiver + 3X 3CH 433Mhz 86 Wall Panel Remote Transmitter

Technical Data:

Input Power:AC85V-250V

Standby Current:97dbm

Transmitting distance:20-50m ( open space)

Decoding mode:software decoding

Remote storage:25pcs

Support remote type: Learning code 1527code, Fixed code(Rolling code can be design)

Working mode:Momentary, Toggle, Latching

Wiring type:fixed terminal

Output Terminal :NO , NC , COM

Dimension of PCB:53.8*31.2mm.

Wiring diagram 1:

NO: Output , normal open;

COM:Output , common ;

NC: Output , normal close.

86 Panel Wall Remote Transmitter 3 Buttons.

It is a panel 86 wall transmitter that can be stuck onto anywhere. It is a learning code transmitter EV1527 IC Chip. It can be learned into most of the learning code receiver, it can work with any kind learning code receiver in our store. So that the trouble brought by routing is avoided successfully.

Working Voltage:DC12V 27A Battery

Working Frequency:433mhz

IC Chip:EV1527

Distance:10-180m (Open Space Long Distance)

Working Current :20-25ma

Big Button wall Transmitter is your best choice for home or Public Places remote control system.

Package Included:

Receiver module (KR2201-4 ) * 3pcs ( include Shell );

3CH RF 433Mhz86 Wall Panel Remote Transmitter

* 3pcs

(Battery Not included)

.

Free Gift:Cross screwdriver* 1pcs.

Attention Please:

Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order,

If you need more cross screwdriver or the flat head screw driver, please order the following links:

https://www.aliexpress.com/store/product/2pcs-set-433-mhz-Hot-Fashion-Repair-Kit-Cross-Flat-Head-Screw-Driver-For-433Mhz-RF/2921105_32798261466.html

Note:

Click on the following Picture to buy Remote Control Switch With other remote control:

About Working mode:

Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.

Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .

Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.

Clearing the code :

Push the learning button on the receivers for 8 times , the codes will be cleaned .

After clearning the code, all the remote control cannot work any more.

Learning the code :(momentary)

Push the learning key on the receiver once time, it comes into momentary setting mode .

Wait for a moment , the LED will be off , it comes into learning state .

Push the remote button , LED indicator on the receiver board will flash then come off .

After 3 seconds, the LED indicator will be on again , learning successfully .

Learning the code : ( Toggle )

Push the learning key on the receiver twice time , it comes into toggle setting mode

Wait for a moment , the LED will be off , it comes into learning state .

Push the remote button,LED indicator on the receiver board will flash then come off.

After 3 seconds , the LED indicator will be on again , learning successfully .

Learning the code :( Latching )

Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”.

For example : button A = ON , button B = OFF

Push the learning key on the receiver triple time ,the LED (on the Receiver)will blink 3 times. When the LED is on, press the button of the remote control(You want to let it learn), Push the remote button A, LED flash for 3 times . Push the remote button B, Led flash for 3 times . After 3 seconds , the LED indicator will be off , Learning to succeed.

A = ON , B = OFF .

NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .

?