color : black,gray,green,white
Desciption :
FunDeal 433Mhz Universal Wireless RF Remote Control Switch AC 110V 220V 1CH Garage Night Light Receiver & 433 MHz Remote Control
Technical Data:
Input Power:AC 85V-250V;
Standby Current:97dbm ;
Transmitting distance: 20-50m ( open space) ;
Decoding mode: software decoding;
Remote storage:25pcs ;
Support remote type: Learning code 1527code, Fixed code(Rolling code can be design) ;
Working mode:Momentary, Toggle, Latching; Wiring type:fixed terminal ;
Output Terminal :NO , NC ;
Dimension of PCB:53.8*31.2mm.
About the DC 12V 4CH Transmitter:
Operating frequency: 433.92MHz
Power by 3V Coin Cell Button Battery (Battery included ),
Material: PVC.
Button: 4 buttons
Size: 59mm x 28mm x 8mm;
Operating voltage: 3V ;
Operating Current: 12mA
Transmitting power: 10mw
Modulation mode: ASK (AM).
Encoding type: Learning.
Transfers distance: 80m.
APPLICATION
Notice: Different options include different packages:
Package 1 Included:
(Only 1 transmitter) RF 433Mhz 4CH Remote Control X 1Pcs (Battery included);
Package 2 Included:
Only 1 Piece AC 220V 1CH Receiver module (KR2201) * 1pcs ( include Shell );
Package 3 Included:
1 Pcs * Remote Control (include battery),
1 Pcs * Receiver module (KR2201) ( include Shell );
Package 4 Included:
4 Pcs * Receivers module (KR2201) ( include Shell ),
1 Pcs * Remote Control (include battery) .
Free Gift:
Cross screwdriver * 1pcs.
Attention Please:
Every parcel only get 1 pcs cross screwdriver as a free gift whatever how many you order.
About Working mode:
Momentary:Push the remote button , the relay connects, release the remote button , the relay dis-connects.
Toggle:Push once the remote button , the relay connects , push twice the remote button , the relay dis-connects .
Latching:Push the remote button A, the relay connects, push the remote button B, the relay dis-connect.
Clearing the code :
Push the learning button on the receivers for 8 times , the codes will be cleaned;
After clearing the code, all the remote control cannot work any more.
Learning the code :(momentary)
Push the learning key on the receiver once time, the LED will be on , it comes into momentary setting learning state mode. Then push the button of remote control ,LED indicator on the receiver board will flash 3 times, and then come off. It means learning successfully .
Learning the code : ( Toggle )
Push the learning key on the receiver twice time , the LED will be on , it comes into toggle setting learning state mode. Then push the button of remote control ,LED indicator on the receiver board will flash 3 times, and then come off. It means learning successfully .
Learning the code :( Latching )
Note: When you choose for latching mode , in order to learn more remote control , you need to learn two different button , the first time learnt is for “ON”, the second time learnt for “OFF”. For example : button A = ON , button B = OFF Push the learning key on the receiver triple time , it comes into latching mode . Wait for a moment , the LED indicator on the receiver board will flash then come off. Push the remote button A . LED flash for 5 times . Push the remote button B . Led flash for 5 times . After 3 seconds , the LED indicator will be on again , learning successfully. A = ON , B = OFF .
NOTE: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .
Login Or Registerto submit your questions to seller
No none asked to seller yet